RODE VideoMic GO Camera-Mount Shotgun Microphone, Simple Operation with No Controls, 3.5mm TRS Output Jack, Runs on Plug-In Power, Integrated Shoe/Pole Shockmount, Black | VIDEOMIC-GO

Longer than Rode’s VideoMicro and with a narrower pickup pattern, the Rode VideoMic GO camera-mount shotgun microphone offers enhanced off-axis rejection for tighter directionality. Like the VideoMicro, it runs on plug-in power and has no controls or switches, making it well suited for mobile journalists, vloggers, and run-and-gun shooters in a hurry.

• Mobile Journalist, Vlogger, Run & Gun
• For Cameras and Portable Recorders
• Runs on Plug-In Power
• Simple Operation with No Controls
• 3.5mm TRS Output Jack
• Detachable Coiled 3.5mm Cable
• Compact and Lightweight
• Windscreen Reduces Wind Noise
• Integrated Shoe/Pole Shockmount

Get instantly clearer audio on all your video content with the easy-to-use VideoMic GO. Compact and lightweight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise.

 

 

 

 

With no complicated controls or switches, the VideoMic GO is ready to use as soon as you turn on your camera. Never miss a shot and get great audio every time.

 

 

 

 

Specs

Microphone

Form Factor	Stand/Boom Mount
Sound Field	Mono
Operating Principle	Line Gradient
Capsule	Electret Condenser
Diaphragm	0.5″ / 12.70 mm
Polar Pattern	Supercardioid
Orientation	End Address
Circuitry	Solid-State (JFET)
Pad	None
High-Pass Filter	None
Tone Adjustment	None
Gain Adjustment	None
Indicators	None
On-Board Controls	None
Windscreen	Foam (Included)

Performance

Frequency Range	100 Hz to 16 kHz
Maximum SPL	120 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection	4 dB at 60° 16 dB at 120° 12 dB at 180°
Sensitivity	-35 dBV/Pa at 1 kHz
Dynamic Range	96 dB
Signal-to-Noise Ratio	60 dB A-Weighted
Equivalent Noise Level	34 dB A-Weighted

Connectivity

Output Connectors (Analog)	1 x 1/8″ / 3.5 mm TRS
Cable Length	7.87 to 13.78″ / 20 to 35 cm
Number of Conductors	2
Wireless Connectivity	None

Power

Operating Voltage	2.5 V
Operating Current Consumption	330 µA (Plug-In Power)