Freezer i13 X

LGA1700 COMPATIBLE

The LGA1700 mounting kit makes the entire Freezer i13 X series compatible with Intel’s new Alder Lake processors. Even though the socket and heatspreader have increased in size compared to the predecessor, the CPU-die surface has been reduced and remains centred. The Freezer i13 X series rests here with its Direct Touch heat pipes and covers this area completely.

SMALL FOOTPRINT FOR OPTIMAL COMPATIBILLITY

The Freezer i13 X combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer i13 X has an installation height of only 137 mm and there are no limitations in RAM compatibility.

PRE-APPLIED MX-2 THERMAL PASTE

Pre-applied, high-performing  MX-2 thermal paste ensures quick and clean assembly.   

LONGER LIFESPAN THANKS TO ITS LOW MOTOR TEMPERATURE

The Freezer i13 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. 

OFFSET HEAT PIPES ENABLE OPTIMAL HEAT DISSIPATION

The direct touch heat pipes attached to the Freezer i13 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.    

P-FAN FOR INCREASED PERFORMANCE

Inspired by the P-series, the Freezer i13 X’s fan benefits from all of the advantages of P-fans:

• High static pressure for increased cooling performance
• Broad RPM range
• Lower power consumption
• Less vibration
• PWM for synchronous fan control

For additional information about the P-fans, we recommend our FAQ

FLUID DYNAMIC BEARING

Thanks to a combination of alloy and lubricant developed in Germany, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended.   

MORE COOLING CAPACITY WITH FREEZER I13 X

The ARCTIC Freezer i13 X sets new standards in cooling.
Proven to outperform its predecessor in cooling capacity.

MORE EFFICIENT AND WHISPER QUIET

In addition to operating more quietly, even at maximum speed, the Freezer i13 X’s built-in fan motor is also much more efficient.
The power consumption was reduced from 0.18 A to 0.07 A, which corresponds to an effective saving of 60 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer i13 X to run at a whisper-quiet 0.3 sone when at maximum speed.