APC BR550GI Power-Saving Back-UPS Pro 550 in Dubai UAE

BrandAPC
20 People watching this product now!
Category:
Description

About APC BR550GI

The Back-UPSPro 550 provides abundant battery backup power, so you can work through short and medium length power outages.
It safe guards your equipment against damaging surges and spikes that travel along utility and network lines. The Back-UPS

  1. LCD (Liquid Crystal Display) gives the status of over 20 different utility and battery backup conditions.
  2. Automatic Voltage Regulation (AVR) instantly corrects voltage fluctuations so you can work indefinitely through brownouts and overvoltages.
  3. 3 “Battery Backup & Surge Protected” Outlets keep CPU,monitor and another critical device running when the power goes out (including a “Master” outlet).
  4. 3 “Surge Only” Outlets protect printers, faxes or other equipment without reducing battery capacity (including two power-saving “Controlled” outlets).
  5. Data Line Protection guards against surges and spikes traveling over Ethernet lines – up to 1000 Base-T (gigabit).
  6. Push Button Circuit Breaker enables quick recovery from overloads.
  7. Automatic Diagnostic Testing ensures your unit is ready when you need it.
  8. Power Chute Software lets you use your computer to access additional power protection and management

Output

Output Power Capacity 330 Watts / 550 VA
Topology Line Interactive
Efficiency at Full Load / Half Load 77% / 84%
Waveform Type Stepped approximation to a sinewave
Output Connections (3) IEC 320 C13 (Battery Backup) (3) IEC 320 C13 (Surge Protection) (2) IEC Jumpers (Battery Backup)

Input

Nominal Input Voltage 230V
Input Connections IEC-320 C14
Input voltage range for main operations 176 – 282V

Batteries & Runtime BR550GI

Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 12 hour(s)
Runtime for 100% load 3.2 (min)
Runtime for 75% load 6.0 (min)
Runtime for 50% load 11.8 (min)

Communications & Management BR550GI

Interface Port(s) Optional Simple Signalling RS232 cable, USB
Control panel Multi-function LCD status and control console
Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Back-UPS Pro Features & Benefits BR550GI

Availability BR550GI

Battery failure notification  Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Boost and Trim Automatic Voltage Regulation (AVR)  Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Automatic self-test  Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Transformer-block spaced outlets  Protect equipment with input transformer blocks without blocking access to other receptacles.

Green mode  Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Intelligent battery management  Maximizes battery performance, life, and reliability through intelligent, precision charging.

Customizable voltage sensitivity  Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

Customizable voltage-transfer points  Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

Cold-start capable  Provides temporary battery power when the utility power is out.

Serviceability

Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Simple battery replacement Increases UPS availability by allowing quick, easy battery replacement.

Protection

Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes .

Dataline surge protection Provides protection of connected equipment from power surges on the data lines.

Surge only outlets Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Safety

Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Manageability

  • USB connection Use your PC to access additional power protection and management features for your UPS via a USB Port.
  • Disconnected battery notification Warns when a battery is not available to provide backup power.
  • LCD Status Display Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  • Audible alarms Provides notification of changing utility power and UPS power conditions

files?p File Name=SPD MCCI

Marketing features

  • Battery-protected and surge-only outlets Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.