The APC SRTG6KXLI RT 6kVA Smart UPS, 230V Input Voltage, Rack Mounted
- Automatic restart of loads after UPS shutdown : Automatically starts up the connected equipment upon the return of utility power.
- Automatic self-test :Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery failure notification :Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- ECO Mode :Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
- LCD Status Display:Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
SRTG6KXLI Smart-UPS Features & Benefits
Adaptability
- Rack/Tower convertible :Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
- Plug-and-Play external batteries :Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
- Flash upgradeable firmware :Install maintenance releases of firmware remotely using FTP.
Availability
- Automatic internal bypass :Supplies utility power to the connected loads in the event of a UPS power overload or fault.
- Temperature-compensated battery charging : Prolongs battery life by regulating the charge voltage according to battery temperature.
- Scalable runtime :Allows additional run time to be quickly added as needed.
- Intelligent battery management :Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Hot-swappable batteries:Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Automatic restart of loads after UPS shutdown :Automatically starts up the connected equipment upon the return of utility power.
Manageability SRTG6KXLI
- Serial connectivity :Provides management of the UPS via a serial port.
- Network manageable :Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
- LED status indicators :Quickly understand unit and power status with visual indicators.
- Intelligent Card Slot :Customize UPS capabilities with management cards.
- InfraStruXure Manager Compatible :Enables centralized management via the APC InfraStruXure Manager.
Marketing features SRTG6KXLI
Avoids costly power problems by keeping your IT equipment and data protected and available.
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation, and zero transfer time to battery during power events.
Save time with easy and convenient remote/network accessibility.
Network manageable via serial, USB or Ethernet. Includes Power chute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
Peace of mind that comes with full equipment compatibility and reliability of a leader.
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Low operating and maintenance costs with proven reliability and intelligent battery management .
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Protection
- Cold-start capable :Provides temporary battery power when the utility power is out.
- Power conditioning :Protects connected loads from surges, spikes, lightning, and other power disturbances.
- Input power factor correction :Minimizes installation costs by enabling the use of smaller generators and cabling.
- Generator compatible :Ensures clean, uninterrupted power to protected equipment when generator power is used.
- Frequency and voltage regulation :Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
- Safety-agency approved :Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Resettable circuit breaker :Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
| Number of power module free slots | 0 |
|---|---|
| Number of power module filled slots | 0 |
| Redundant | No |
| Height | 17.78 cm |
|---|---|
| Width | 44 cm |
| Depth | 62 cm |
| Net weight | 51.9 kg |
| Mounting preference | No preference |
| Mounting mode | Rack-mounted with kit |
| Two post mountable | 0 |
| USB compatible | No |
| Network frequency | 40…70 Hz auto-sensing |
|---|---|
| Number of input connectors | 1 hard wire 3-wire (1P + N + E) |
| Input voltage limits | 160…285 V |
| Maximum input current | 30 A |
| Switching current capacity | 40 A |
| Maximum configurable power in W | 6000 W |
|---|---|
| Harmonic distortion | Less than 2 % |
| Output frequency | 50/60 Hz +/- 3 Hz sync to mains |
| Crest factor | 3 : 1 |
| UPS type | Double conversion online |
| Wave type | Sine wave |
| bypass type | Internal bypass (automatic and manual) |
| Full load runtime | 00:02:15 6000 W |
| Half load runtime | 00:08:30 3000 W |
| Maximum configurable power in VA | 6000 VA |
| Product certifications | CE |
|---|---|
| Standards | EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018 |
| Ambient air temperature for operation | 0…40 °C |
|---|---|
| Relative humidity | 0…95 % non-condensing |
| Operating altitude | 0…6600 ft |
| Ambient air temperature for storage | -15…45 °C |
| Storage Relative Humidity | 0…95 % non-condensing |
| Storage altitude | 0.00…15240.00 m |
| Acoustic level | 55 dBA |
| Heat dissipation | 1330.74 Btu/h |
| IP degree of protection | IP20 |
| Preinstalled device | Network management card 3 with environmental monitoring |
|---|---|
| Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
| Emergency power off | Yes |
| Surge energy rate | 600 J |
|---|
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 27.5 cm |
| Package 1 Width | 79 cm |
| Package 1 Length | 59 cm |
| Package 1 Weight | 59 kg |
| Warranty | 3 years repair or replace (excluding battery) and 2 years for battery |
|---|
Additional information
| Ups Capacity |
6 KVA |
|---|---|
| Height |
17.78CM |
| Width |
44.0CM |
| Depth |
62.0CM |
| Net Weight |
51.9KG |
| Features: |
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events. |
You must be logged in to post a review.
Reviews
There are no reviews yet.