FGCEVDP10MM2/00I-UPS EVO DSP PLUS 10.0 – PF 0.9 WITHOUT BATTERIES – MADE IN ITALY
UPS EVO DSP PLUS 10.0 – Power 10 KVA PF 0.9. On Line Technology (VFI) DSP, 94% Efficiency, Input / output 230 / 230Vac 50 / 60Hz, dimensions 19×68.8×44.2 cm, weight 23 Kg,ready to install 16 7.2-9-11ah batteries, extension bacup time through additional battery boxes (optional). Multifunction graphic LCD display, static and manual bypass, EPO contact for emergency shutdown, USB and RS232 communication ports for UPS control and on / off programming via the free TecnoManager software. SNMP, Dry Contact or MODBUS card (optional).
Code / Part Number |
FGCEVDP10MM2/00I made in italy |
| Nominal power | 10 KVA |
| Active power | 9 KW |
| Power factor | 0,9 |
| Technology | On-Line Double Conversion transformerless (VFI-SS-111) |
| Cooling | Fan cooling |
| Audible noise | 58 dBA to 1 m |
| Dimension (UPS) WxHxD | 19×68,8×44,2 cm |
| Dimension (with packing) WxHxD | 32×92,2×58,7 cm |
| Weight | 23 Kg |
Input FGCEVDP10MM2/00I |
|
| Number of phases | 1Ph+N |
| Nominal voltage | 208Vac/220Vac/230Vac/240Vac |
| Input voltage range | 176Vac-300Vac from 50% to the 100% of loading, 110Vac-300Vac up to 50% load |
| Nominal frequency | 50/60 Hz (selectable) |
| Input frequency range (On-Line mode) | ±7% |
| Input power factor | 0,99 |
Output FGCEVDP10MM2/00I |
|
| Number of phases | 1Ph+N |
| Nominal voltage | 208Vac/220Vac/230Vac/240Vac |
| Voltage Regulation at 0 linear load (On-Line and Battery mode) | ±2% |
| Voltage THD at rated linear load | 3% (linear load), 5% (non-linear load) |
| Crest factor | 3:1 |
| Frequency | 50/60 Hz (selectable) |
| Frequency stability | ±0,1 Hz |
| Inverter waveform | Sinewave |
| Overload capability (Line mode) | 110% for 30 minutes, 130% for 5 minutes, >130% for 10 seconds |
| Overload capability (Battery mode) | 110% for 3 minutes, 130% for 30 seconds, >130% for 10 seconds |
| Efficiency | 94%, calculated in double conversion mode at 100% load to 100% load according to standard 62040-3 |
| Transfer time | 0 ms (On-Line) |
Battery for FGCEVDP10MM2/00I |
|
| Type | Lead acid, sealed, maintenance free |
| Installed inside | – |
| Extended autonomy | External Battery Box (optional) |
Environmental specification FGCEVDP10MM2/00I |
|
| Working temperature | From 0 to 55 °C (recommended from 20 to 25 °C) |
| Humidity | 95% without condensation |
| Maximum altitude | 3000 m |
| IP protection | IP20 |
| Certifications | CE (Standards: Low Voltage Directive IEC EN 62040-1; EMC Directive IEC EN 62040-2; classification IEC EN 62040-3) |
| Support Information | |
|---|---|
| Warranty | 1 years for UPS 1 Year for battaries |
| Physical Specifications | |
| Weight | 23.00kg |
| Width X Depth X Height | 32.00cm x 58.70cm x 92.20cm |
Accessories
INTERNAL SNMP INTERFACE FOR UPS EVO DSP MM, EVO DSP PLUS MM-TM-TT, EVO DSP PLUS RT
DRY CONTACT DB9 INTERFACE FOR UPS EVODSP MM, EVO DSP PLUS MM-TM-TT EVO DSP PLUS RT
DRY CONTACT 9PIN INTERFACE FOR UPS EVODSP MM, EVO DSP PLUS MM-TM-TT, EVO DSP PLUS RT
INTERF. MODBUS RS485 INT. EVO DSP MM, EVO DSP PLUS MM-TM-TT, EVO DSP RT
Additional information
| Ups Capacity |
10KVA |
|---|
