Teltonika TSW101 Automotive PoE+ Unmanaged Switch, 5 x RJ45 Gigabit Ethernet Ports, Speeds Up to 1000 Mbps, 4 x PoE+ Ports with 802.3af & 802.3at Support, 9-30 V Power, Plug & Play | TSW101

د.إ 618.75

BrandTeltonika
ModelTSW101
20 People watching this product now!
SKU: GTC15001105 Category:
Description

TSW101 is Teltonika Networks’ first automotive-dedicated unmanaged switch. Equipped with five Gigabit Ethernet ports, four of which support IEEE802.3af and IEEE802.3at PoE+ standards. A wide range of supported power supply voltages (9-30 VDC), and a compact size allow it to slot into many automotive applications. Classified as a power source equipment (PSE), this device enables power supply centralization – providing up to 30 watts per single port and maximum output power of 60 watts. 10/100/1000 Mbps Ethernet ports for streamlined, high-bandwidth solutions. Ideal for providing both: in-vehicle power and an Ethernet data connection simultaneously.

 

AUTOMOTIVE SWITCH

Ideal for in-vehicle solutions

POE+

4 x PoE+ ports with 802.3af and 802.3at support

GIGABIT ETHERNET

5 x Gigabit Ethernet ports with speeds of up to 1000 Mbps

INDUSTRIAL DESIGN

Rugged aluminum housing

LOW INPUT VOLTAGE

9-30 V power range for PoE

PLUG-N-PLAY

No configuration needed

 

 

 Specification

INTERFACES
Ethernet 5 x RJ45 ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
POE
PoE ports Port 1- 4
PoE standards 802.3af and 802.3at
PoE Max Power per Port (at PSE) 30 W
Total PoE Power Budget (at PSE) 60 W
Maximum Ethernet cable length 100 m
PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking) 10 Gbps
Packet buffer 128 KB
MAC address table size 2K entries
Jumbo frame support 9216 bytes
POWER
Connector 2-pin industrial DC power socket
Input voltage range 9-30 VDC
Input voltage range for PoE 9-30 VDC
Power consumption Idle: 0.64 W / Max: 2.31 W / PoE Max: 60 W
PHYSICAL INTERFACES (PORTS, LEDS)
Ethernet 5 x RJ45 ports, 10/100/1000 Mbps
Status LED’s 1 x Power LED, 10 x LAN status LED’s
Power 1 x 2-pin industrial DC power socket
Ground 1 x Grounding screw
PHYSICAL SPECIFICATION
Casing material Aluminum housing
Dimensions (W x H x D) 115 x 32 x 95 mm
Weight 354 g
Mounting DIN rail or wall mounting (additional kit needed), flat surface placement
OPERATING ENVIRONMENT
Operating temperature -40 °C to +75 °C
Operating humidity 10 % to 90 % non condensing
Ingress Protection Rating IP30
CERTIFICATION & APPROVALS
Regulatory CE, REACH, RoHS, WEEE
  TSW101 CE
  TSW101 UKCA
  TSW101 FCC
  TSW101 IC
  TSW101 CB
  TSW101 RCM
  E-Mark