About this item

• 100 pcs Rj45 plugs for unshielded twisted pair solid or stranded cable, supports 24 to 26 AWG round or flat network cable
• Gold-plated contacts provides reliable performance for a Gigabit Ethernet rated network
• Save money by using these connectors to create your own patch cables
• ROHS compliant, and the color is Transparent, allow indicator light penetration better
• Easy for Carry, Gold plated connectors resist corrosion, improve the signal performance

Put the network cable into the stripping port of the cable crimping tool and rotate it two times to pull it out.

Cut off the pvc jacket and aluminum foil so that the wires are prepared as follows.

Trim the tips of the wires with a crimping tool to make tips neat and reserve appropriate length.

• Arrange the wires in the order and push the wires into the Cat6 connector to the deepest position.
• Note:Your wire’s Outside Diameter(OD) including the plastic housing should not exceed 1.0mm to match the wire guide’s OD.

• Put the wired crystal RJ45 end into the cable clamp for crimping.

• Align the chip position and press down.