Eaton 9PX 11000i HotSwap (9PX11KiBP)
9PX 11000i HotSwap, 11000 VA/10000 Watts, 176-276V Input, (4) IEC-320-C19 Output, Multilingual Graphic LCD Display, Black
General |
|
| Topology | On-line double conversion with PFC (Power Factor Correction) system |
| Configuration | Rack/Tower |
| Part Number | 9PX11KiBP Series Eaton 9PX |
| Rating (VA/Watts) | 11000/10000 |
| Dimensions (H x W x D, mm) | 440 x 260 x 700 |
| Weight (kg) | 86 |
| Warranty | 2 years warranty |
Â
Electrical Input |
|
| Connection |
Hardwired – see manual for terminal block layout
|
| Input Voltage Range | 176-276V without derating (up to 100–276V with derating) |
| Nominal Voltage | 200/208/220/230/240/250V |
| Frequency | 50/60 Hz autoselection |
| Frequency Range | 40-70 Hz |
| Short Circuit Current | 150 A |
| THDI | 5% |
Electrical Output |
|
| Voltages | 200/208/220/230/240/250V +/– 1% |
| Voltage THD | 2% |
| Outlets |
(4) IEC-320-C19
Hardwired – see manual for terminal block layout
|
| Overload Capacity | 102–110% : 120s, 110–125%: 60s, 125–150%: 10s, >150%: 900ms |
| Efficiency (Normal Mode) | Up to 95% in Online mode, 98% in Hi-Efficiency mode |
| Output Frequency | 50/60 Hz autoselect, frequency converter as standard |
| Load Crest Factor | 3:1 |
Â
Battery Management |
ABM® and Temperature compensated charging method (user selectable), automatic battery test, deep discharge protection, automatic recognition of external battery units. |
| Extended Battery Capability | EBM (3U) |
| Â | |
| Communications | |
| User Interface | Multilingual graphical LCD display |
| Communication Ports | 1 USB port, 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously), 4 dry contacts (DB9), 1 mini terminal block for remote On/Off and 1 for remote power Off, 1 DB15 for parallel operation |
| Communication Slot | 1 slot for Network-MS card, ModBus-MS or Relay-MS cards. |
| Â | |
Environmental & Standards |
|
| Audible Noise | 50dB |
| Operating Temperature | 0 to 40°C continuous |
| Safety markings | IEC/EN 62040-1, UL 1778, CSA 22.2 |
| EMC Markings | IEC/EN 62040 -2 , FCC Class A, IEC/EN 62040-3 (Performance) |
| Approvals | CE, CB report (TUV), UL |
You must be logged in to post a review.
Reviews
There are no reviews yet.