APC SRV3KRI Easy UPS On-Line SRV 3000VA RM 230V

BrandAPC
15 People watching this product now!
Category:
Description

About APC SRV3KRI

  • Input Power Factor Correction
    This product has a power factor corrected input side ensuring that the input power factor is always 1 regardless of load and mains voltage. A power factor of 1 minimizes installation costs by allowing the use of smaller cables and smaller fuses.
  • Intelligent battery management
    Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Intelligent SmartSlot
    The mini slot supports various optional management cards which provide basic or essential monitoring, management and control features for the UPS.
  • LCD graphics display
    Text and mimic diagrams that display modes of operation, system parameters and alarms.
  • Serial connectivity
    Provides management of the UPS via a serial port.
  • USB connectivity
    Provides management of the UPS via a USB port (not available on all models).
  • Pure sine wave output on battery
         Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
  • Double conversion on-line topology
         Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC          then DC to AC conversion process. The battery is only used as a back-up source.
  • ECO Mode
        Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
  • Generator compatible
        Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • High efficiency
       High efficiency rates that remain stable even at lower operating power levels.
APC Easy UPS On-Line SRV 3000VA RM 230V
  • Output power capacity: 2.4kWatts / 3.0kVA
  • Rack Height: 2U
  • Output Connections: (1) IEC 60320 C19 (Battery Backup) | (6) IEC 60320 C13 (Battery Backup)
  • Nominal Output Voltage: 230V
  • Nominal Input Voltage: 230V
  • Input Connections: IEC 60320 C20
  • Battery type: Lead-acid battery
  • Typical recharge time: 4hour(s)
  • Waveform type: Sine wave
  • Cord Length: 1.5meters

Serviceability

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Predictive failure notification.

Provides early-warning fault analysis ensuring proactive component replacement.

Audible alarms

Provides notification of changing utility power and UPS power conditions

Availability

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Manageability

Intelligent Card Slot

Customize UPS capabilities with management cards.

LCD graphics display

Text and mimic diagrams that display modes of operation, system parameters and alarms.

LED Indicators

Provide easy-to-read status of the unit and utility power conditions.

Network manageable

Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

Serial connectivity

Provides management of the UPS via a serial port.