About APC SRV3KRI
- Input Power Factor Correction
This product has a power factor corrected input side ensuring that the input power factor is always 1 regardless of load and mains voltage. A power factor of 1 minimizes installation costs by allowing the use of smaller cables and smaller fuses.
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Intelligent SmartSlot
The mini slot supports various optional management cards which provide basic or essential monitoring, management and control features for the UPS.
- LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
- Serial connectivity
Provides management of the UPS via a serial port.
- USB connectivity
Provides management of the UPS via a USB port (not available on all models).
-
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Double conversion on-line topology
Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
- ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
- Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
- High efficiency
High efficiency rates that remain stable even at lower operating power levels.
- Output power capacity: 2.4kWatts / 3.0kVA
- Rack Height: 2U
- Output Connections: (1) IEC 60320 C19 (Battery Backup) | (6) IEC 60320 C13 (Battery Backup)
- Nominal Output Voltage: 230V
- Nominal Input Voltage: 230V
- Input Connections: IEC 60320 C20
- Battery type: Lead-acid battery
- Typical recharge time: 4hour(s)
- Waveform type: Sine wave
- Cord Length: 1.5meters
Serviceability
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Availability
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Manageability
Intelligent Card Slot
Customize UPS capabilities with management cards.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
Serial connectivity
Provides management of the UPS via a serial port.
Additional information
| Height |
8.6CM |
|---|---|
| Width |
43.7CM |
| Depth |
63.2CM |
| Net Weight |
27.6KG |
You must be logged in to post a review.
Reviews
There are no reviews yet.