THE ULTIMATE CHASSIS FOR BEGINNERS AND ENTHUSIASTS ALIKE

• Premium look
• Unprecedented modularity
• Hinged flip panels all around
• Optimized cooling support
• Cable management with ease
• Optimized storage configuration

EXQUISITE STEEL CRAFTSMANSHIP

Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system, allowing it to run at peak performance.

MORE ADVANCED COOLING SUPPORT

The optimized airflow is a result of the collaboration between the brand-new mesh design, additional exhaust vent holes, and three high-performance PWM cooling fans.

HIGH-PERFORMANCE BUILT-IN PWM FANS

2 x 140mm PWM intake fans pre-installed at the front and 1 x 120mm exhaust fan in the back of the PERFORMANCE EDITION produce ample airflow, keeping your system running at peak performance.

EXPERIENCE FAN CONTROL ON A WHOLE NEW LEVEL

The four-mode fan controller on the top front allows you to experience fan control on a whole new level. Select L for casual use like internet browsing, press H when you’re pushing your GPU(s) and CPU hard.

Note!
The hub supports fans with either 3-PIN or 4-PIN header. However, if you intend to synchronize and control fan speed and noise level for the added fans via the fan controller, the added fans should have 4-PIN PWM headers.

MODULAR PSU SHROUD COVER

The space between the top and bottom chamber now features two removable PSU shroud covers to house either 2 x 2.5” SSDs or can be removed to fit 2 x 120mm fans.

Compared to the former integrated design, the modular PSU shroud covers allow users to remove them for an unobstructed airflow between the top and bottom chamber.

When 2 fans are mounted, and the cover plates removed, ventilation efficiency is even better.

Even when 2 x SSDs are mounted, the vents on  the PSU shroud covers guarantee good ventilation.

MULTI-WAY FAN/RADIATOR BRACKET

The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your needs.

HOW TO INSTALL THE MULTI-WAY FAN/RAD BRACKET

The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your need.

ATTENTION!
Do not install a 140/280MM radiator in the inner side of the bracket otherwise irreparable deformation might occur. The correct way to install is to mount fans first then place a radiator on top of the fans.

OPTIMIZED STORAGE CONFIGURATION

With the modular drive cage, side-mounted SSD bays, and additional SSD space on the modular PSU shroud cover, the LANCOOL II MESH is capable of holding up to 9 drives.

TOOLLESS SLIDING DRIVE CAGE
Slide the hard drive cage along its bottom track to the position that best fits your interior configuration.

DRIVE INSTALLATION GUIDE

SUPPORT UP TO 9 DRIVES

Modular drive cage: 3 x 3.5” HDDs/2.5” SSDs

Side-mounted SSD bays behind motherboard tray:
2 x 2.5” SSDs
Side-mounted SSD bays at the bottom right flip shroud:
2 x 2.5” SSDs

REMOVABLE TWO-WAY CABLE MANAGEMENT BAR

Flippable, flexible, multi-functional

FLIP PANELS AND SHROUDs ALL AROUND

The tempered glass side panels offer an unobstructed view to the interior configuration while the bottom shroud panels provide quick access to PSU/drive installation.